These rugged valves combine two Kepsel® Cartridge Check Valves with close fitting pilot piston shuttle to offer dependable cylinder locking in both directions. They permit free flow from valve port to cylinder port (or to portion of circuit) through one check valve while at the same time piloting open the check valve on the other side to allow reverse flow. When pressure at the valve ports is removed both check valves close and lock against movement in either direction by preventing reverse flow. Kepner's Flexible Seal Seat™ provides positive bubble-tight locking to prevent load drift or circuit creep. Standard and specialty valve designs handle a wide variety of applications, and are commonly used with double acting cylinders for position locking and for holding against line rupture or control valve leakage.
Unit of Measure

Specifications

Body Materials

N/A Aluminum

Valve Module Materials

N/A Steel

Pilot Piston Materials

N/A Stainless Steel

Port Caps Materials

N/A Steel

O-Ring Seals

N/A Cylinder port caps - Buna N Internal check valve - Teflon®
Temperature1 N/A -40 to 300 ºF-40 to 149 ºC

Max. Operating Pressure

N/A 3000 psi207 bar

Max. Flow

N/A 40 gpm151 lpm

A - Total Length

N/A 7.410 in

B

N/A 6.660 in

C

N/A 2.56 in

D

N/A 2 1/2 in

E

N/A 0.750 in

F

N/A 0.500 in

G

N/A 1.750 in

H

N/A 5.160 in

J

N/A 1.500 in

K

N/A 0.350 in

L Hex

N/A 1 7/16 in

M - End Connections (Cyl. And Valve Port)

N/A 3/8 FPT

Features and Benefits

N/A
- Flexible Seal Seat™ ensures zero leak (bubble-tight) seal locking both sides
- Surge flow protected with calibrated pilot orifice
- Close fitting pilot piston with pressure balancing grooves for minimal pilot loss
- Basic pilot ratio 3:1
- High strength, light weight aluminum body
- Mounting holes for installation

  • 1 O-Ring dependent