Flo-Temp couplings provide the flow needed to cool or heat injection molds and die casting dies. Sockets are available non-valved for maximum flow and valved to prevent fluid loss when disconnected. Flo-Temp couplings can be used with water-glycol, hot water and hot oil. Body sizes are 1/4", 3/8" and 1/2".

Features:

  • Non-valved straight through models for maximum flow
  • Valved sockets for automatic shut-off when line is disconnected
  • Sockets available with straight, 90° or 45° hose stems or without hose stem
  • Brass plugs with male pipe thread for recessed mounting to avoid damage to plugs when molds are being changed or stored
  • 1 - 6 of 6 | Results Per Page | View | Unit of Measure
    1 

    Series

    Body Size

    Socket Type

    Interchangeability

    Temperature Range

    Rated Pressure

    List Price

    N/A 1/4 in6.35 mm N/A Valved Socket N/A Other Manufacturer´s Coolant Line Couplings N/A -30 to 450 ºF-34 to 232 ºC N/A 200 psi14 bar QUOTE
    N/A 1/4 in6.35 mm N/A Non-Valved Socket N/A Other Manufacturer´s Coolant Line Couplings N/A -30 to 450 ºF-34 to 232 ºC N/A 200 psi14 bar QUOTE
    N/A 3/8 in9.52 mm N/A Valved Socket N/A Other Manufacturer´s Coolant Line Couplings N/A -30 to 450 ºF-34 to 232 ºC N/A 200 psi14 bar QUOTE
    N/A 3/8 in9.52 mm N/A Non-Valved Socket N/A Other Manufacturer´s Coolant Line Couplings N/A -30 to 450 ºF-34 to 232 ºC N/A 200 psi14 bar QUOTE
    N/A 1/2 in12.7 mm N/A Valved Socket N/A Other Manufacturer´s Coolant Line Couplings N/A -30 to 450 ºF-34 to 232 ºC N/A 200 psi14 bar QUOTE
    N/A 1/2 in12.7 mm N/A Non-Valved Socket N/A Other Manufacturer´s Coolant Line Couplings N/A -30 to 450 ºF-34 to 232 ºC N/A 200 psi14 bar QUOTE
    1 - 6 of 6 | Results Per Page | View | Unit of Measure
    1