Hydraulic Couplings
hydraulic-couplings
Series HK Couplings are the most versatile couplings available and are suitable for use with various liquids, chemicals, steam, gases and vacuum. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B. Body sizes range from 1/8" to 1".
Features:
The coupling that set the industry standard
Multiple options make the HK our most versatile coupling
series available
Brass, steel and stainless steel construction available in all
sizes; 1/4" body size is also available in polypropylene
End connections are female NPTF, BSPP and SAE o-ring boss
Heavy duty steel couplings for use in high impulse service
available in most sizes
Steam coupling available in 3/8" body size
HCouplings-1-8HK-primary.JPG
Series 10-20 HK Couplings have the same features as the 1-8 HK, but have larger bodies and higher flow rates. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B (No ISO Standard available for the 10-HK). Body sizes range from 1 1/4" to 2 1/2".
Features:
Brass, steel and stainless steel construction available in all sizes
End connections are female NPTF and BSPP
Heavy duty steel couplings for use in high impulse service available in 12-HK and 20-HK
10-12-20-HK-HCouplings-primary.JPG
The Series 96 coupling is a heavy-duty wing nut coupling designed for use in hydraulic lines where dry break and minimum air inclusion are required. It is ideal for hydraulic dump trucks, oil field equipment, spreading equipment and applications requiring the ability to connect and/or disconnect under pressure. Body sizes are 3/4", 1" and 1 1/4".
Features:
Flat face valve design
Non-spill double shut-off with minimum air inclusion
Connect/disconnect under pressure
Corrosion resistant brass body
Plugs can be bulkhead mounted
Interchanges with other manufacturers’ couplings
HCouplings-Series96-primary.JPG
The Series FF is a flat face dry break or minimum spill hydraulic coupling that meets or exceeds the ISO 16028 standard. FF series is ideal for applications where hydraulic spillage is a concern and interchangeability with other manufacturers is important. Body sizes are 1/4", 3/8", 1/2", 5/8", 3/4", and 1".
Features:
Heavy knurled sleeve creates a non-slip grip
Meets or exceeds ISO 16028 standard
5075 psi maximum operating pressure for all sizes (connected and disconnected)
Push-to-connect
Standard sleeve-locking device prevents accidental disconnection
Color identification rings available to help prevent the crossing of lines
HCouplings-FFseries-primary.JPG
The Series HA 15000 is a general purpose hydraulic and fluid transfer coupling that conforms to the dimensional requirements of ISO 7241-1 Series A. Body sizes range from 1/4" to 1".
Features:
Ball lock
Manual connect, disconnect
Poppet valving
Slim profile
Zinc plated steel construction
NPTF and BSPP end connections
Available push-to-connect socket designed for bulkhead mounting (1/2" body size only)
HCouplings-HA1500-priamry.JPG
Series WA 56000 and HP3 are high pressure hydraulic screw together couplings designed to operate at pressures up to 10,000 psi. Their rugged design makes them suitable for use in hydraulic ram, pump and high impulse applications. The WA 56000 has a poppet valve and HP3 has a ball valve. Body sizes are 1/4" and 3/8".
Features:
Threaded latching
Rugged steel construction
Poppet valves with elastomer seal standard in 1/4" coupling
Poppet valves and ball valves available in 3/8" coupling
Body size matches thread size. 1/4" and 3/8" body sizes do not interchange.
HCouplings-WA56000-HP3-primary.JPG
Hydraulic Couplings, Series HK, 1-HK to 8-HK
(10)Series HK Couplings are the most versatile couplings available and are suitable for use with various liquids, chemicals, steam, gases and vacuum. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B. Body sizes range from 1/8" to 1".
Features:
Hydraulic Couplings, Series HK, 10-HK & 12-HK & 20-HK
(3)Series 10-20 HK Couplings have the same features as the 1-8 HK, but have larger bodies and higher flow rates. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B (No ISO Standard available for the 10-HK). Body sizes range from 1 1/4" to 2 1/2".
Features:
Hydraulic Couplings, Series 96, Wing Nut
(3)The Series 96 coupling is a heavy-duty wing nut coupling designed for use in hydraulic lines where dry break and minimum air inclusion are required. It is ideal for hydraulic dump trucks, oil field equipment, spreading equipment and applications requiring the ability to connect and/or disconnect under pressure. Body sizes are 3/4", 1" and 1 1/4".
Features:
Hydraulic Couplings, FF Series, ISO 16028 Flat Face Hydraulic
(6)The Series FF is a flat face dry break or minimum spill hydraulic coupling that meets or exceeds the ISO 16028 standard. FF series is ideal for applications where hydraulic spillage is a concern and interchangeability with other manufacturers is important. Body sizes are 1/4", 3/8", 1/2", 5/8", 3/4", and 1".
Features:
Hydraulic & Fluid Transfer Couplings, Series HA 1500, ISO 7241-1 Series A
(5)The Series HA 15000 is a general purpose hydraulic and fluid transfer coupling that conforms to the dimensional requirements of ISO 7241-1 Series A. Body sizes range from 1/4" to 1".
Features:
Hydraulic Couplings, Series WA 56000/HP3, Thread-to-Connect 10,000 psi
(2)Series WA 56000 and HP3 are high pressure hydraulic screw together couplings designed to operate at pressures up to 10,000 psi. Their rugged design makes them suitable for use in hydraulic ram, pump and high impulse applications. The WA 56000 has a poppet valve and HP3 has a ball valve. Body sizes are 1/4" and 3/8".
Features:
