Kepsel® cartridge valves are designed for simple installation (no expensive machining for cavity) and offer the same outstanding performance as their counterpart Kep-O-seal® inline valves. These springoperated poppet valves, with optional relief settings, allow free flow in only one direction and prevent backflow.They also are used for relief and by-pass functions; however, they should not be used as safety valves. Kepner's Flexible Seal Seat™ ensures bubble-tight shutoff of liquid or gas, and long service life. Standard and specialty valve designs handle a wide variety of applications, and are ideal for use in sub-plate and manifold assemblies, pump inlet/outlet, and cylinder blocks.
Unit of Measure

Specifications

Size

N/A 1/16 to 2 in1.6 to 51 mm

Body Materials

N/A 303 Stainless Steel 316 Stainless Steel Brass Standard Steel
O-Ring Seals1 N/A Buna-N EP Neoprene Viton®
Temperature2 N/A -300 to 450 ºF-184 to 232 ºC

Crack Pressure Ranges

N/A 1 to 2 psi0.07 to 0.14 bar

Relief / Check Crack Pressures

N/A 5 psi10 psi25 psi50 psi65 psi0.35 bar0.7 bar1.7 bar3.5 bar4.5 bar

Max. Operating Pressure

N/A 3000 psi207 bar

Max. Flow

N/A 200 gpm757 lpm

A

N/A 1.212 in1.217 in

B

N/A 1.102 in1.106 in

C

N/A 1.030 in

D

N/A 0.090 in

E

N/A 0.100 in

F

N/A 0.110 in

G - Total Length

N/A 1.931 in1.940 in

H

N/A 0.610 in

J - Angle

N/A 45 º

External Seal O-Ring Size

N/A 024

Features and Benefits

N/A
- Flexible Seal Seat™ for zero leak (bubble-tight) seal at low and high pressures
- No threaded connections (avoid potential leakage)
- O-Ring seal positively secured
- Poppet stop inside valve body prevents spring from bottoming out
- Generous flow passages allow full flow with minimal pressure drop
- Compact, easy installation – Accessory Kepner Holding Device Kits available

  • 1 Other materials available
  • 2 O-Ring dependent