These rugged valves combine two Kepsel® Cartridge Check Valves with close fitting pilot piston shuttle
to offer dependable cylinder locking in both directions. They permit free flow from valve port to cylinder
port (or to portion of circuit) through one check valve while at the same time piloting open the check
valve on the other side to allow reverse flow. When pressure at the valve ports is removed both check
valves close and lock against movement in either direction by preventing reversemore flow. Kepner's Flexible
Seal Seat™ provides positive bubble-tight locking to prevent load drift or circuit creep. Standard and
specialty valve designs handle a wide variety of applications, and are commonly used with double
acting cylinders for position locking and for holding against line rupture or control valve leakage. less
Unit of Measure
Specifications
Body Materials |
N/A Aluminum |
Valve Module Materials |
N/A Steel |
Pilot Piston Materials |
N/A Stainless Steel |
Port Caps Materials |
N/A Steel |
O-Ring Seals |
N/A Cylinder port caps - Buna N Internal check valve - Teflon® |
| Temperature1 | N/A -40 to 300 ºF-40 to 149 ºC |
Max. Operating Pressure |
N/A 3000 psi207 bar |
Max. Flow |
N/A 40 gpm151 lpm |
A - Total Length |
N/A 8.820 in |
B |
N/A 8.060 in |
C |
N/A 2.99 in |
D |
N/A 3 in |
E |
N/A 0.750 in |
F |
N/A 0.500 in |
G |
N/A 2.000 in |
H |
N/A 6.560 in |
J |
N/A 2.000 in |
K |
N/A 0.350 in |
L Hex |
N/A 1 7/8 in |
M - End Connections (Cyl. And Valve Port) |
N/A 3/4 SAE |
Features and Benefits
|
N/A
|
- 1 O-Ring dependent
