Request Information

Flo-Temp couplings provide the flow needed to cool or heat injection molds and die casting dies. Sockets are available non-valved for maximum flow and valved to prevent fluid loss when disconnected. Flo-Temp couplings can be used with water-glycol, hot water and hot oil. Body sizes are 1/4", 3/8" and 1/2".

Features:

  • Non-valved straight through models for maximum flow
  • Valved sockets for automatic shut-off when line is disconnected
  • Sockets available with straight, 90° or 45° hose stems or without hose stem
  • Brass plugs with male pipe thread for recessed mounting to avoid damage to plugs when molds are being changed or stored
    • Unit of Measure

    Specifications

    Body Size1 N/A 3/8 in9.52 mm

    Socket Type

    		 N/A Valved Socket

    Interchangeability

    		 N/A Other Manufacturer´s Coolant Line Couplings

    Temperature Range

    		 N/A -30 to 450 ºF-34 to 232 ºC

    Rated Pressure

    		 N/A 200 psi14 bar

    Materials

    		 N/A
  • Brass socket construction
  • Stainless steel spring and locking balls
  • Fluorocarbon seal (-30° F to +450° F)
  • Brass plug

    • Applications & Industries

    		 N/A
  • Injection Molding
  • Heating / Cooling
    • 1 Nominal